P2466 — Exhaust gas temperature sensor circuit — bank 2, sensor 3

The module reports a fault in the indicated exhaust temperature sensing circuit; this does not identify a failed sensor or confirm unusual exhaust heat. Use wiring and live-data information specific to the vehicle. This code refers to bank 2, sensor 3; exact physical location and thresholds vary by vehicle.

Affected system: Exhaust gas temperature monitoring

Symptoms

• Warning light may illuminate
• Related system function may be impaired
• Vehicle-specific symptoms vary

Possible causes

• Exhaust or emissions plumbing leak, restriction, valve fault, sensor fault, or damaged wiring
• Related wiring, connector, power or ground fault
• Vehicle-specific mechanical or control issue

What to check

• Record stored and pending codes and freeze-frame data
• Inspect the relevant exhaust or emissions plumbing and electrical connections, then compare commanded operation with sensor feedback during the enable conditions.
• Confirm measured values against the vehicle service information
• Retest under the conditions that set the code
• Inspect the relevant exhaust or emissions plumbing and electrical connections, then compare commanded operation with sensor feedback during the enable conditions.
• Repair the verified cause and confirm the code does not return

Also written as: P2466-00, P246600 (some scan tools add the fault-type byte, e.g. -00).