P0943: Hydraulic Pressure Unit Cycling Period Too Short — what it means, the affected system and what to check before replacing parts.
Meaning, symptoms, causes and checks
The hydraulic pressure unit cycles more frequently than the monitor expects. This describes the time between pressure-unit cycles rather than simply low sensor voltage. The code does not alone identify the accumulator, pump or a leak as the cause.
Affected system: Transmission hydraulic sensing and pressure unit
Symptoms
- Warning light may illuminate
- Related system function may be impaired
- Vehicle-specific symptoms vary
Possible causes
- Implausible sensor or switch signal, poor ground, connector corrosion, or wiring damage
- Related wiring, connector, power or ground fault
- Vehicle-specific mechanical or control issue
What to check
- Record stored and pending codes and freeze-frame data
- Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
- Confirm measured values against the vehicle service information
- Retest under the conditions that set the code
- Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
- Repair the verified cause and confirm the code does not return
Also written as: P0943-00, P094300, PO943 (some scan tools add the fault-type byte, e.g. -00).