P0938: Hydraulic Oil Temperature Sensor Range/Performance — what it means, the affected system and what to check before replacing parts.
Meaning, symptoms, causes and checks
Hydraulic-oil temperature sensor: The monitored response fails its expected range or performance relationship, rather than specifying one failed component. The monitored quantity is hydraulic-fluid temperature, not engine-oil temperature. Electrical high/low limits cannot be read directly as physical hot/cold conditions.
Affected system: Transmission hydraulic sensing and pressure unit
Symptoms
- Warning light may illuminate
- Related system function may be impaired
- Vehicle-specific symptoms vary
Possible causes
- Implausible sensor or switch signal, poor ground, connector corrosion, or wiring damage
- Related wiring, connector, power or ground fault
- Vehicle-specific mechanical or control issue
What to check
- Record stored and pending codes and freeze-frame data
- Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
- Confirm measured values against the vehicle service information
- Retest under the conditions that set the code
- Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
- Repair the verified cause and confirm the code does not return
Also written as: P0938-00, P093800, PO938 (some scan tools add the fault-type byte, e.g. -00).