P0913: Gate Select Actuator Circuit High — what it means, the affected system and what to check before replacing parts.
Meaning, symptoms, causes and checks
Gate-selection actuator: The electrical input is above its permitted range. This is an electrical finding, not an instruction to replace the monitored component. This is the actuator circuit for gate selection, not the separate position-sensor channel. The exact mechanism and electrical values depend on the transmission.
Affected system: Automated transmission gate selection
Symptoms
- Warning light may illuminate
- Related system function may be impaired
- Vehicle-specific symptoms vary
Possible causes
- Implausible sensor or switch signal, poor ground, connector corrosion, or wiring damage
- Related wiring, connector, power or ground fault
- Vehicle-specific mechanical or control issue
What to check
- Record stored and pending codes and freeze-frame data
- Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
- Confirm measured values against the vehicle service information
- Retest under the conditions that set the code
- Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
- Repair the verified cause and confirm the code does not return
Also written as: P0913-00, P091300, PO913 (some scan tools add the fault-type byte, e.g. -00).