P0895: Shift Time Too Short — what it means, the affected system and what to check before replacing parts.
Meaning, symptoms, causes and checks
The measured transmission shift duration is too short relative to the calibrated expectation. This is a timing/performance result, not a direct electrical-circuit diagnosis. Acceptable duration depends on the transmission and operating conditions.
Affected system: Transmission hydraulic and shift operation
Symptoms
- Warning light may illuminate
- Related system function may be impaired
- Vehicle-specific symptoms vary
Possible causes
- Transmission fluid, hydraulic, solenoid, connector, or control-circuit issue
- Related wiring, connector, power or ground fault
- Vehicle-specific mechanical or control issue
What to check
- Record stored and pending codes and freeze-frame data
- Compare commanded and actual transmission data, inspect fluid condition and level according to the vehicle procedure, then test the relevant circuit and solenoid.
- Confirm measured values against the vehicle service information
- Retest under the conditions that set the code
- Compare commanded and actual transmission data, inspect fluid condition and level according to the vehicle procedure, then test the relevant circuit and solenoid.
- Repair the verified cause and confirm the code does not return
Also written as: P0895-00, P089500, PO895 (some scan tools add the fault-type byte, e.g. -00).