P07E4: Unable to Engage Park — what it means, the affected system and what to check before replacing parts.
Meaning, symptoms, causes and checks
The transmission controller reports that the Park (P) state cannot be engaged when requested. This status alone does not pinpoint a selector, actuator, control circuit or internal mechanical fault.
Affected system: Powertrain
Symptoms
- Warning light may illuminate
- Related system function may be impaired
- Vehicle-specific symptoms vary
Possible causes
- Implausible sensor or switch signal, poor ground, connector corrosion, or wiring damage
- Related wiring, connector, power or ground fault
- Vehicle-specific mechanical or control issue
What to check
- Record stored and pending codes and freeze-frame data
- Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
- Confirm measured values against the vehicle service information
- Retest under the conditions that set the code
- Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
- Repair the verified cause and confirm the code does not return
Also written as: P07E4-00, P07E400, PO7E4 (some scan tools add the fault-type byte, e.g. -00).