P03C0: Cylinder 5 Pressure Sensor Circuit High — what it means, the affected system and what to check before replacing parts.
Meaning, symptoms, causes and checks
P03C0 describes a high electrical input from the cylinder 5 pressure-sensor circuit. A high signal is not the same as confirmed excessive pressure in the cylinder.
Affected system: Powertrain
Symptoms
- Warning light may illuminate
- Related system function may be impaired
- Vehicle-specific symptoms vary
Possible causes
- Mechanical timing or operating issue, sensor or actuator fault, connector or wiring damage
- Related wiring, connector, power or ground fault
- Vehicle-specific mechanical or control issue
What to check
- Record stored and pending codes and freeze-frame data
- Record freeze-frame conditions; compare relevant live data and inspect mechanical operation, wiring and related fault codes before replacing parts.
- Confirm measured values against the vehicle service information
- Retest under the conditions that set the code
- Record freeze-frame conditions; compare relevant live data and inspect mechanical operation, wiring and related fault codes before replacing parts.
- Repair the verified cause and confirm the code does not return
Also written as: P03C0-00, P03C000, PO3C0 (some scan tools add the fault-type byte, e.g. -00).