P0319: Rough-road sensor B signal circuit — what it means, the affected system and what to check before replacing parts.
Meaning, symptoms, causes and checks
The definition identifies the signal circuit for rough-road sensor B. It establishes the monitored input but does not specify the sensor technology, expected signal, module or failed component; because rough-road detection differs by vehicle platform, use the exact wiring, configuration and monitor description before drawing conclusions.
Affected system: Rough-road detection
Symptoms
- Warning light may illuminate
- Related system function may be impaired
- Vehicle-specific symptoms vary
Possible causes
- Implausible sensor or switch signal, poor ground, connector corrosion, or wiring damage
- Related wiring, connector, power or ground fault
- Vehicle-specific mechanical or control issue
What to check
- Record stored and pending codes and freeze-frame data
- Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
- Confirm measured values against the vehicle service information
- Retest under the conditions that set the code
- Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
- Repair the verified cause and confirm the code does not return
Also written as: P0319-00, P031900, PO319 (some scan tools add the fault-type byte, e.g. -00).