P00F2: Humidity sensor — circuit or communication fault — what it means, the affected system and what to check before replacing parts.
Meaning, symptoms, causes and checks
The controller reports a fault for the humidity sensor circuit. A Ford diesel OBD monitor documents its use with a SENT signal, where missing or incorrectly timed messages may trigger the code. SENT communication is an implementation example, not a claim that every vehicle uses the same interface or has identical wiring and thresholds.
Affected system: Humidity sensing
Symptoms
- Warning light may illuminate
- Related system function may be impaired
- Vehicle-specific symptoms vary
Possible causes
- Implausible sensor or switch signal, poor ground, connector corrosion, or wiring damage
- Related wiring, connector, power or ground fault
- Vehicle-specific mechanical or control issue
What to check
- Record stored and pending codes and freeze-frame data
- Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
- Confirm measured values against the vehicle service information
- Retest under the conditions that set the code
- Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
- Repair the verified cause and confirm the code does not return
Also written as: P00F2-00, P00F200, PO0F2 (some scan tools add the fault-type byte, e.g. -00).