P00E6: Reports a correlation problem among multiple sensors in the intake-air pressure measurement system for bank 2.
Meaning, symptoms, causes and checks
Reports a correlation problem among multiple sensors in the intake-air pressure measurement system for bank 2. It does not single out one sensor as the cause.
Affected system: Powertrain
Symptoms
- Warning light may illuminate
- Related system function may be impaired
- Vehicle-specific symptoms vary
Possible causes
- Implausible sensor or switch signal, poor ground, connector corrosion, or wiring damage
- Related wiring, connector, power or ground fault
- Vehicle-specific mechanical or control issue
What to check
- Record stored and pending codes and freeze-frame data
- Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
- Confirm measured values against the vehicle service information
- Retest under the conditions that set the code
- Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
- Repair the verified cause and confirm the code does not return
Also written as: P00E6-00, P00E600, PO0E6 (some scan tools add the fault-type byte, e.g. -00).