P007A — Charge Air Cooler Temperature Sensor Circuit Bank 1

The bank 1 charge-air cooler temperature-sensor circuit has a monitored electrical fault. This concerns a sensing or signal condition, not proof that the charge-air cooler itself is defective. Interpret the installed sensors and their readings using the applicable vehicle service procedure; electrical signal level is not automatically the physical air temperature.

Affected system: Charge-air-cooler temperature sensing

Symptoms

• Warning light may illuminate
• Related system function may be impaired
• Vehicle-specific symptoms vary

Possible causes

• Implausible sensor or switch signal, poor ground, connector corrosion, or wiring damage
• Related wiring, connector, power or ground fault
• Vehicle-specific mechanical or control issue

What to check

• Record stored and pending codes and freeze-frame data
• Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
• Confirm measured values against the vehicle service information
• Retest under the conditions that set the code
• Compare the named sensor or switch signal with actual operating conditions; inspect the connector, reference supply, ground and harness.
• Repair the verified cause and confirm the code does not return

Also written as: P007A-00, P007A00, PO07A (some scan tools add the fault-type byte, e.g. -00).