P0001: volume regulator a control circuit/open. Diagnose the circuit before replacing parts.
Meaning, symptoms, causes and checks
The fuel volume regulator A control circuit is open or faulty. It meters fuel; the code neither measures pressure directly nor condemns the pump.
Affected system: Powertrain
Symptoms
- Hard starting or no start if fuel delivery is affected.
- Engine warning lamp; reduced power or stalling.
Possible causes
- Broken wire, backed-out terminal or corroded connection in the identified circuit.
- Internal actuator or control-driver electrical fault after wiring is excluded.
What to check
- Identify fuel volume regulator A by VIN and check wiring and subcodes before measuring.
- Save failure conditions and related codes; establish whether volume regulator a is commanded when the fault returns.
- Inspect connector, heat/vibration-exposed wiring and shared supplies before replacing components.
- With modules isolated as instructed, test continuity from actuator to ECU and check terminal retention.
- Compare command and electrical response with engine specifications; verify the repair under the original conditions.
Also written as: P0001-00, P000100, PO001 (some scan tools add the fault-type byte, e.g. -00).